Should You Put Your Phone in Rice After Dropping It in Water?

So you dropped your phone in water, now what? After the panic subsides, your first thought might be to put your phone in rice. The rice hack has been around for many years, but does it work? Well, the answer might surprise you. 

If you’re curious to know whether or not you should put your phone in rice after dropping it in water, continue reading the content below.

What Is the Phone in Rice Trick?

According to the phone in rice hack, you’re supposed to put your phone in rice after it falls into water. The myth is that the rice absorbs the water and dries your phone out without damaging it. Unfortunately, this isn’t true.

In fact, putting a water damaged phone in rice does more harm than good. The reason being is because starch, dust, and small bits of rice can get lost in the crevices of your phone, such as the opening for the headphone jack. 

Don’t Put Your Phone in Rice: Alternative Methods

You might be wondering what to do with your water damaged phone if you shouldn’t put your phone in rice. Well, there are some tricks that’ll help to prevent your phone from becoming ruined:

Take Preventive Measures

Your first order of business after dropping your phone in water is to turn it off as soon as possible. Next, remove your phone case and take out your sim card. Keep the SIM card door open so the water doesn’t stay trapped inside.

Lastly, wipe off the outside of your phone. After you’ve completed these steps, focus on drying your phone out. 

Use Silica Gel Packets

If you want to preserve your water damaged phone, use silica gel packets instead of rice. Silica gel packets are found in many items—like shoes—because they help to absorb moisture.

Luckily, they can do the same for your phone. Place several of them under your phone or on top of it. Let it sit for a few hours while the silica gel packets draw in the water.

Keep in mind that although gel packets absorb water, they may not fix the issue with your phone. Depending on the severity of the damage, it’s best to get your phone fixed by a professional. 

Air Dry

Allowing your phone to air dry might seem too good to be true. But most of the time if you drop your phone in water, allowing it to air dry is an effective method. Put it on a flat surface on top of a paper towel and let it dry out in a warm environment. 

You can also allow a fan to blow over it to help with the drying process. After 24 to 48 hours, turn the phone back on. But avoid switching it on while it’s going through the air-drying process. 

Again, you might not want to risk doing your own repair after you’ve dropped your phone in water. Instead, take it to a professional repair shop, like Fruit Fixed, and we’ll take care of it.

How Does Water Damage Occur?

Water damage usually happens through the open ports of your phone, like the speakers, microphone charging port, and headphone jack. There are some phones that provide covers for the charging docks, but that doesn’t make it waterproof. Even if you find a way to cover all the openings of your phone, water could still get through. 

If you drop your device in the toilet or a puddle of rainwater, the water usually creates the most damage once it infiltrates the internal circuitry. That’s why you should turn your phone off and remove the SIM card when you drop it in water.

Doing so cuts off the power before the water gets into the circuitry. It’s also a good idea to remove the battery too—only if the battery on your phone is removable.

Furthermore, you shouldn’t shake your device or use a hairdryer to draw out the water. Both of these methods could ruin it further by pushing the water deeper inside the phone or causing heat damage. There are also other harmful hack methods for drying a water damaged phone out that you should avoid, like letting your phone sit in the sun. This is a terrible idea, especially since water can create rust on the inside of your phone. 

As you can see, there aren’t too many solutions for fixing water damage at home. But taking your phone to a professional right away can help to save it.

How to Know if Your Phone Is Water Damaged

Sometimes you can drop your phone in water, and it’s fine. Other times it’s completely ruined. However, certain phones will let you know how bad your device is damaged.

Many smartphones have a liquid contact indicator sticker that changes colors when it comes into contact with water. It’s usually located under the SIM card slot or under the battery, depending on what type of smartphone you have. If it shows severely damaged, take it to a technician as soon as possible.

Let Us Fix Your Water Damaged Phone

If you’ve dropped your phone in water, don’t put your phone in rice. Sometimes DIY methods aren’t effective, and there could be more extensive damage to your phone than you realize. So, let our expert Fruit Fixed technicians help out instead.

We provide a variety of repair services for smartphones, tablets, and computers. 

If you have any questions for us, call 804 698-0004 or check out our online repair tool for more information.

How to Clean an iPhone Charging Port: The Complete Guide

Did you know that the average battery life of smartphones is 10-17 hours?

If your iPhone performs lower than these averages, it might be because of a problem with your iPhone charging port. In most cases, it’s dirty and needs some cleaning. But with no prior experience, you might feel scared to do it on your own.

With this guide, you’ll learn how to clean an iPhone charging port. That way, whenever your smartphone charges slowly, you can try this solution to solve the problem. Read on and find out more.

1. Use a Q-Tip Method

iPhone charging ports get dirty as time passes. That’s why you must clean it periodically to avoid building it up. Aside from Q-tips, you can also use paper towels and cotton rounds, rolling its corner to make a gentle, non-abrasive, and dry tip.

To start, you must get a paper or cotton product that you can roll or small enough to go inside the port. After that, put the tip into the port and move it around carefully. Ensure that you get all the edges before reinserting the charger cable into it.

Jiggling the paper around slowly enables you to make debris and dust cling to it. This can also dislodge the same particles, making them fall out of the port. This frees smaller pieces of connections the iPhone needs to charge faster.

Take note, never put chemicals like cleaning supplies onto the material inserted into the port. It’s because your iPhone will get internal damage. With the cheapest iPhone model priced at $399, you can’t afford to make unnecessary replacements.

2. Paper Clip Method

This method is as simple as the Q-tip way, but it carries some risk. After all, you might scrape and damage some of the port’s internal sensitive touchpoints. But as long as you aren’t too aggressive, you’ll be okay.

This method can also use small pins, paperclips, and needles. Put the thin metal inside the port and jiggle it with utmost care. This will help in loosening the dirt and other debris that might lurk within.

Do your best to find where dirt is and get rid of them with the thin metal. If you feel like you knocked it loose, shake your phone to bring it out. Once done, reinsert the cable and see whether it charges faster.

If it doesn’t work, you can learn how to fix a dysfunctional iPhone charging port with our guide here. Do this to ascertain whether it’s the right time to call in the experts.

3. Compressed Air Method

An important consideration when cleaning an iPhone port is the risk of damaging it more by putting in foreign objects. It’s because the port has fragile touchpoints used for attaching the charging cable. If you end up damaging these, the charger might stop working, regardless of how clean it becomes.

That’s why this method is the safest since it’s the only one without the potential of damaging any internal machinery. Start by looking for a can of compressed air and hold it upright.

When doing this, be careful not to put the nozzle inside or too near the port. Once it’s in an optimal position, press the nozzle and use bright, light bursts of air spray. After the last burst, wait for a few moments before putting the charger table into the port again.

An important reminder is to resist blowing into the port using your breath. Hot air coming from your mouth won’t benefit the charging port’s points of contact. It does more harm if you blow sharply into the port.

4. Get Professional Help

If you have the time, you can get out of the house and go to the nearest Apple Store. Experienced employees know the best methods of cleaning the charging port safely. They also have the right tools to accomplish the job, like minuscule vacuum cleaners.

If the Apple Store is too far for your comfort, go to a repair shop or business specializing in mobile gadgets. They also have the tools and expertise necessary to deal with the charging port’s delicate parts. Sometimes, paying a fee for this type of repair is better than replacing the phone because of untoward damage.

How Does Dirt Get In There?

Your iPhone port becomes dirty for many reasons. It often depends on your home and work environment since dust particles and lint can accumulate inside it. A day out in the dust won’t matter, but you’ll notice the impact as months and years go by.

A more obvious reason for this is when you dropped it in the dirt. If you use it even when exposed to dust and mud, your charging port becomes clogged. That’s why you must take precautions and shield your iPhone from these environments.

How Does a Dirty Charging Port Affect Performance?

A dirty port could mean accessories not recognizing your iPhone. Also, the charging cable might not fit as snugly, meaning your iPhone won’t charge as fast. The worst part is when it becomes loose and prevents data transfer from happening smoothly.

What Do You Do When Cleaning Doesn’t Work?

If you still have problems after fixing your charging port, consider replacing it instead. You can either do it by yourself or pay a professional to do it.

The former is riskier since you must look for the right connector for your hardware and a set of tools. If you look at its interior, you’re likely to find lots of screws and other parts that you must remove. That way, you can access the connector’s assembly and replace it.

Learn How to Clean an iPhone Charging Port Today

These are some methods on how to clean an iPhone charging port. Use these tips if you’re confident enough with your skills.

Do you need more cleaning tips for your iPhone? If you do, we encourage you to go through our library of guides today. You can start with this post and learn how to remove sand from your phone.

This Is How to Remove a SIM Card From an iPhone

Do you own an iPhone? Did you open your device this morning only to find the message that your SIM card is invalid? Or do you experience SIM card errors far too often lately? 

Then you may need a timely SIM card replacement.

Generally, people don’t replace SIM cards. These cards can last several years or even over a decade before they require a replacement. As for the reasons to replace your SIM card, there are a few. 

But the more important concern is to learn how to remove a SIM card properly.

Continue reading below as we break down the steps for removing an iPhone SIM card the right way.

How to Remove a Sim Card From Your iPhone 4 (and Later Models)

As we mentioned earlier, removing a SIM card from your iPhone involves some steps. And if you’re using an iPhone 4 or any later model (including all the X models), here’s how you pull it off.

First, hold your device upright. You want the screen of your iPhone facing you. Next, find the SIM tray of your device.

You will find this near the center of the right edge of your smartphone. In case you have an iPhone 11 or an iPhone X, you will find the tray a little bit closer to the bottom-right edge.

After finding the tray, take the SIM eject tool that came with your device. In case you lost the tool, get a thin paper clip and straighten it. Insert the end of the pin into the hole then gently push it in. 

Continue pushing until the tray ejects. Thereafter, pull the tray outward and lift the SIM card off the try. 

Before installing a new SIM card, look at the orientation of the card. This will help you insert the new one seamlessly and avoid scratching the sensitive part.

Also, there are newer iPhone models like the iPhone 11 and X models that feature dual trays for NANO SIM cards. If you own any of these phones, be sure to remove the correct card from the dual trays.

A pro tip is to look for the name of the carrier on the SIM card. 

And as you insert the new SIM card, keep in mind that it will only fit the tray in one direction. This is because the SIM card comes with a notch. Hence, if you feel some sort of resistance, it means the SIM card is facing the wrong direction or if it’s backward.

Removing the SIM from Original 3GS (and Earlier Models)

If ever you’re using an iPhone 3GS or any of the earlier models, here are the steps to follow. Like with the newer iPhones, hold your smartphone upright with the screen facing you.

Go to the top of the edge of your device and find the SIM tray. You will find this right at the center, beside the Power button.

Get your trusty SIM eject tool or straightened paper clip and insert it into the small hole on the tray. You should find this hole on the tray’s left side. After inserting the end of the clip or eject tool, gently push it inward.

As soon as a portion of the tray comes out, slowly pull it outward. Remove the SIM card gently and place the new SIM on the tray. Again, check the orientation of the SIM card and see if it matches the correct direction of the tray.

Complete the process by pushing the tray into the smartphone. If you feel any resistance, check the orientation of the SIM card and adjust the position accordingly.

Key Considerations When Removing Your SIM Card

As we earlier said, there are a few instances that merit a replacement of your old SIM card. Furthermore, there are also some risks that you may encounter should you decide to discard your old one.

First, there is the risk of damaging your device. If you are someone who doesn’t have a steady hand, you may damage not only the new SIM but also your iPhone. Some people have a heavy hand, which results in forcing the clip or ejecting tool too hard.

When this happens, you risk damaging the tray or other similar components. In turn, you will void the warranty if ever your smartphone is still under one.

Hence, you will have to look for a trusted iPhone repair center to fix the problem.

But if your device is no longer under warranty, then you can proceed with the SIM card replacement without much worry. However, you need to be careful when inserting the ejecting tool. 

Protecting Your SIM With a PIN

Apart from learning how to remove a SIM card, you should also learn how to protect your SIM card using a PIN lock. A SIM PIN lock is an excellent way of protecting your data and account information from unwanted access.

This is different from the usual passwords that you apply to your device. A password can lock your smartphone but it doesn’t protect your SIM.

The same thing goes if you’re using filesystem encryption. Learn how to set up a SIM PIN lock on your device.

Additionally, you need to be extra careful when performing a SIM card lock. There is a risk of botching your SIM card lock if you don’t do it properly. 

It can render your SIM card obsolete. It will also leave your device useless until you insert a new SIM card. But if you do it correctly, it will be one of the wisest decisions you can make with your smartphone.

Let’s Fix Your iPhone, Today!

Learning how to remove a SIM card is a simple yet essential skill any iPhone user should learn. Not only will it ensure the safety of your device, but it will also get you back on track faster when it comes to your iPhone usage. But if you’re dealing with more serious issues with your device, then you came to the right place.

We offer comprehensive iPhone repairs at friendly prices. Get in touch with us and tell us more about your iPhone concerns. Let us look into your device and let’s get it running, ASAP!

How to Get Sand Out of Your Phone

You sit in a chair facing the ocean with your toes curled in the sand. The ocean breeze warm on your face.

Waves lap on the shore like a mantra. You feel at peace. You pull out your favorite summer read from your purse. You leaf through the pages until the end of the chapter.

The day couldn’t be more relaxing. Then you notice your brand new smartphone lying in the sand. You freak out, thinking about how to get sand out of your phone. 

Here are some tips to keep your phone safe at the beach.  

How to Protect Your Phone from Sand

According to the Miami Herald, two smartphone screens break each second? While your phone case can protect your phone from damage, it doesn’t protect against sand and other debris from getting into your phone.

If you’re packing up for a fun day at the beach, add an extra step and make sure your phone is secure and safe from debris. Besides all of the sand, the wind can be a huge problem at the beach.

The wind blows sand and other debris around in the air, which can get into your phone. To keep your phone safe, follow these tips. 

Use a Sandwich bag

One easy way to keep your phone safe from sand is to place it in the sandwich baggie. The great thing about this option is that your phone’s touchscreen will still be operational while in the bag. 

You don’t have to worry about sand getting into your phone, and you can still check out your favorite apps while listening to the waves. 

Invest In a Waterproof Case

If you live in a beach town and spend every waking moment at the beach, you may want to invest in a waterproof case. These are ideal for the everyday beachgoers and will keep your phone safe from water, sand, and other debris.

While it can be costly, so is paying for a new phone. Consider which is cheaper and save yourself the hassle in the long run. No one likes to spend all day at the phone store waiting for service and trying to get your old pictures and files back.

Save your time and the hassle and purchase a waterproof case. 

Use a Peanut Butter Jar

If you don’t like the feeling of using your phone through a bag or paying for expensive waterproof cases, you can use a cleaned out peanut butter jar. Most bigger jars can hold a cell phone or two, a set of keys, and even a portable charger. 

Open the jar whenever you need your phone and then place it back in and screw back on the lid for a safe space on the beach. 

How to Get Sand Out of Your Phone

If you’re reading this now, it’s because you have sand in your phone. No worries. You can always use the tips above for your next outing to the beach.

If you notice that you have brought home a little more than you bargained for at the beach, don’t worry. We’ve got you covered. Here are three simple ways how to get rid of sand in your phone.  

1. Use Compressed Air

One thing is certain: cell phones and sand don’t mix. While it can be a hassle, it doesn’t have to ruin your day. 

One quick and simple way to remove sand or other debris from your phone is to use a compressed air canister. You can find compressed air canisters at your local Radio Shack or Best Buy. 

Here are the steps to clean a sandy phone: 

  1. Turn off your phone first. 
  2. Read the instructions on your compressed air canister and attach the nozzle to reach small crevices. 
  3. Aim your compressed air canister at the phone and hit it with a few quick sprays. 

How to remove debris from the charging port: 

  1. Aim your compressed air canister on an angle, and spray into the charging port several times. 
  2. You may have to use multiple angles to get the sand out. 

2. Use a Vacuum Cleaner

After you use the compressed air canister to remove sand from the phone use a vacuum to suck out any other stubborn debris that could still be in the phone. 

Here’s how to use a vacuum cleaner to remove debris from your phone: 

  1. Turn off your phone.
  2. Attach the crevice tool on your vacuum. 
  3. Place your crevice tool by the charging port or another part of the phone. 
  4. Turn on the vacuum and suck out any debris. 

3. Use a Paper Clip

Once you have used the compressed air canister and the vacuum, your last step is to use a small paper clip to remove the last parts of stubborn sand left over. Simple yet effective, this will help get the last remaining debris your compressed air canister and vacuum may have missed. 

Think of the first to options as macro solutions and this one as a micro solution. Here is how to use a paper clip to remove sand from your phone: 

  1. Turn off your phone. 
  2. Open up your paper clip keeping one side still folded. 
  3. Wrap scotch tape around the paperclip with the sticky side facing out. 
  4. Use your paperclip to remove any last bits of debris.  

Don’t Let Sand Ruin Your Day

Getting sand in phone cases doesn’t have to ruin your day. Sure, it’s an inconvenience, but as you can see, it is an easy fix. Now that you know how to get sand out of your phone, we bet you’ll be making plans for the beach. 

If you still need professional help for the hardware of your phone after using these steps, we’ve got you covered

Remember some of our earlier tips to save you the hassle. If you found this article helpful, please check out our blog for more tips to help you with your technology needs. 

Why Does My Phone Keep Beeping? This Is What You Need to Know

Over 75 percent of Americans use smartphones, and if you’re one of them, you know the device can be great. But iPhones and Androids don’t come without problems.

One annoying issue is inexplicable phone beeping, and the problem could be small or large. The only way to find out is to try and fix it.

Keep reading for some answers to, why does my phone keep beeping?

Usage Change

Many things can cause a random phone beep, but you may be able to eliminate some reasons. If you know when the phone beeping started, you can determine what caused it.

For example, maybe you just updated the software on your phone. Or perhaps you just downloaded a new app.

You may not always know what caused the beeping, but try to think of when it began. Then, you can narrow down the potential issues. Whether you have a new or old iPhone or Android, technology can be unpredictable.

So knowing how your phone normally runs can also help you determine when something goes wrong. If you need help, you can contact a professional.

However, you may not always know when your iPhone beeps for no reason. If you haven’t made any updates or changed your app usage, you can go through a few steps to determine potential causes.

Always On

When it comes to using your phone, think about if you ever turn it off. If you keep your phone on all of the time, it may get tired.

Turning off your phone can give you a break from the beeping, and it can give your phone a break from running. If you still need to be aware of the time or use an alarm, you can set one on your computer.

However, even turning your phone off for a minute can be helpful. Restarting your device may be the perfect solution to your phone beep issues.

In the future, consider turning your phone off once a week. You can use that time for other activities, and you can come back to your phone with a new perspective.

App Issues

If restarting your phone doesn’t fix the problem, one of your apps might be the culprit. Think about any recent app downloads or updates you had. If you downloaded or updated one, you can start with that program.

Continue to any other recent updates and downloads. To find these apps, you can visit your App Store or Google Play history. You can use that list of apps to test which is the issue.

Start by force closing the app. On an iPhone, double click the home button, and swipe up on the app you want to close. Android users can go into settings, then click on Application Manager the Downloaded. Click Force Stop to close the app.

You can also consider deleting the app and reinstalling it. If there’s a new update for the app in question, update it.

Too Many Notifications

You may be wondering, why does my phone keep beeping randomly? If that’s the case, your apps may not be the issue. When the beeps are at random, you could be getting some sort of notification.

Some notifications, like text messages and phone calls, are nice. However, if you have a lot of apps, you may get a lot of notifications that make your phone beep.

If this is the case, you can go into your settings and learn how to fix random notifications on iPhone and Android. You can go through each app and determine what alerts you want and what you don’t.

Doing this can be an easy way to minimize your phone beeping, and you can still get essential messages. As you download new apps, take note of when they ask to send notifications.

Then, you can choose which apps can send alerts.

Cache Partition Issues

Android users have yet another potential cause of phone beeping. You may need to wipe the cache partition on your phone to fix the issue.

To fix wipe the cache partition, turn off your phone. Hold the volume up, power, and home keys at the same time until the phone vibrates.

Then, you can release the power key. You can release the other keys when you see the System Recovery screen. Next, you’ll need to use the volume down to select Wipe Cache Partition.

Select it with the power key, then wait until you see Reboot System Now. Finally, you can turn on the phone to see if it is still beeping. If not, the cache partition solved your phone beep problem.

Need a Full Reset

If nothing seems to work, you may need to perform a full factory reset on your phone. A full reset will adjust all of the settings to what the device had when you got it.

Before you do the reset, make sure you backup your device to the cloud. Resetting to factory settings will delete your data, so you should have access to it somewhere.

Once you have a backup, you can go into your settings and reset your device to factory settings. After you reset the device, you can see if the phone beeping has stopped.

If so, you can restore the latest backup to your device during the setup process. But if you still have problems, you may need to take your phone to a professional.

Then, you can make sure you have tried every possible option. If you can’t do anything else, you can upgrade to a new device.

Why Does My Phone Keep Beeping?

Your smartphone can do a lot of things, from checking the time to browsing the internet. But sometimes, things can go wrong, you may wonder, why does my phone keep beeping?

It could be as simple as getting notifications, but you may need to reset your device.

Are you having trouble with your smartphone? Visit us in Virginia Beach or at a store near you.