Your iPhone is at the center of your life. 

From photos, texts, and other important information, your iPhone carries all of your resources and content. During the coronavirus pandemic, it can seem like the worst time to have a broken iPhone. However, if your iPhone is broken, there is no reason to panic. 

There are ways to get it repaired even if most tech stores are closed. Here is how to get your broken iPhone fixed during the coronavirus pandemic. 

Troubleshoot Your iPhone’s Software

If your iPhone seems to have a software issue, there are ways to troubleshoot it without leaving your home. Say your phone appears to run slower or is glitching, you can perform a hard reset to kick it back into gear. 

How to Perform a Hard Reset: 

– Quickly hit the up and down buttons on the side of your iPhone

– Hold down the power button. 

– Keep holding the power button until an Apple logo appears. 

A hard reset can help boot your phone back; it does not erase any data but can help eliminate any irritating bugs that can happen if your phone has been on and running for a while. 

How to Check Your iPhone’s Battery

Does your iPhone’s Battery ever drain rapidly? There are ways to manage your battery usage and make sure it is functioning correctly. 

There are ways to maximize battery performance. These include going to Settings > Low Power Mode. What Low Power Mode does is that it temporarily reduces background activity. Downloads and mail fetch are disabled until you can fully charge your phone. 

You can also use Low Power Mode even if your Battery is plenty charged. It helps save power if you will be away from a charger for an extended period of time. Additionally, if you feel like there is something mechanically wrong with your Battery, you can also check its health status. 

To check your Battery’s health status, go to Settings > Battery > Battery Health. What this will show you is how to check your Maximum Capacity, which is the measure of battery capacity relative to when the phone was new. 

Lower capacity means fewer hours between uses and charges. Additionally, this will show you if your Battery may need to be replaced. If your phone seems to be shutting down often, your phone may enable peak performance capability.  

What this means is that your iPhone will maximize the Battery’s usage, but performance can suffer. With this feature, applications may take longer to load, and your iPhone may feel sluggish. 

If this happens, your broken iPhone Battery may need replacing. Don’t fret, as there are many ways to get your iPhone battery replaced conveniently at this time.   

iPhone Will Not Hold a Charge

Say you plug your iPhone in, and you feel looseness. Or, you plug your iPhone in, and nothing happens. There may be an easy fix on how to help your iPhone hold a charge. 

First, check for debris. If your phone has been in and out of a pocket, there could be some lint that is stuck in the charging port. Additionally, with time, the port can just become dirty from dust and debris in the air. 

To check for debris, turn your phone off and use a toothpick to dig out any debris.

Be careful with this. 

The charging port in an iPhone houses many tiny pins that are fragile. Take your time and go slow to clear out any debris, and make sure you are not tugging on any pins. Also, make sure your lightning cable is free from debris. 

Use a microfiber cloth to tidy up your cord. Also, check the cord to make sure it isn’t limp or broken. If any cables inside are broken, it can cause issues for charging. The power adapter is also crucial. 

Make sure your power adapter is the correct one. Most iPhones use a 5W USB adapter. If you have the iPhone 8 or higher, you can use a 29W USB-C adapter for fast charging. Additionally, if you have the iPhone 8 or higher, you can wirelessly charge on a charging pad and avoid cords altogether. 

Broken iPhone Will Not Power On 

If your iPhone does not power on, there can be a multitude of reasons why. 

First is the software. As previously mentioned, you can troubleshoot your software. However, if your iPhone is entirely blank, you may have to go to more extreme measures to get it up and running again. 

Go to on a computer and turn off “Find My iPhone.” From there, plug your device into iTunes. Hold the top left side button and the power button at the same time. iTunes will guide you; sometimes, it will prompt you to update your software or erase the device. 

If it is just a software update, proceed. Your iPhone most likely powered off due to a software update failure. However, if iTunes prompts you to erase all content and settings, then you may have to restore your iPhone. 

This helps your software start fresh. Though it may seem intimidating, as long as you had a valid iCloud backup or have your content saved elsewhere, you will be fine to proceed with the erase and setup. 

Take Charge of Your iPhone

At this moment, it can be a bad time to have a broken iPhone. However, with the right tools and resources, you can quickly get it fixed. If your iPhone is suffering from physical damage like a broken screen, check out some resources that can fix it for you at a reasonable rate.

Check out our blog for more information and to take charge of your technology. 

Leave a Reply